Installing the Disappear Plate: A Quick Guide for Car Enthusiasts

Ready to Upgrade?

The Disappear Plate Cover is simple to install, even if you're not a wiring expert. Here’s a breakdown of how to get it done in under an hour.

What’s in the Box?

  • Electrochromic Plate Cover

  • Long-Range Remote + Receiver

  • Full Wiring Kit (Battery & 12V Compatible)

  • Mounting Bracket (Black Silicone, Carbon Fiber, or Metal)

  • LED Status Indicator

Installation Steps

  1. Mount the Bracket – Secure the bracket using factory screw points.

  2. Attach the Plate Cover – Slide the cover into place and lock it in.

  3. Wire It Up – Connect to your battery or any 12V accessory power.

  4. Sync the Remote – Follow the pairing steps in the manual (takes seconds).

  5. Test and Tidy Up – Clean up wiring and verify the LED indicator works.

Pro Tips

  • Use zip ties or wire loom to keep your setup looking clean.

  • Check voltage before connecting to avoid damage.

  • For custom installs, you can run the switch to a hidden dash spot.

Final Note

Keep your install show-ready. It's meant for display or off-road use—check your local laws before hitting the streets.

Back to blog